表4_胫骨远端骨折仿生轻量化设计接骨板的优化设计与生物力学分析：有限元分析

数据集获取（Figshare）

• 源站标题：Table4_Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis.XLSX
• DOI：10.3389/fbioe.2022.820921.s004
• 发布日期：2022-02-21
• 文件数：1 个
• 文件总体积：22.40 MB
• 源站页面：https://frontiersin.figshare.com/articles/dataset/Table4_Optimal_Design_and_Biomechanical_Analysis_of_a_Biomimetic_Lightweight_Design_Plate_for_Distal_Tibial_Fractures_A_Finite_Element_Analysis_XLSX/19206315

命令行下载

curl -L -o "Table4_Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis.XLSX" "https://ndownloader.figshare.com/files/34119264"

文件清单

• Table4_Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis.XLSX（22.40 MB）

文件总体积 22.40 MB（源站 API 实测）。

数据加载示例（图像类）

from PIL import Image
import glob, os

files = (glob.glob(os.path.join(path, "**", "*.png"), recursive=True)
       + glob.glob(os.path.join(path, "**", "*.jpg"), recursive=True)
       + glob.glob(os.path.join(path, "**", "*.tif"), recursive=True))
print("图像文件数:", len(files))
img = Image.open(files[0]); print("尺寸/模式:", img.size, img.mode)

# torchvision Dataset 方式:
# from torchvision import datasets
# ds = datasets.ImageFolder(path)  # 要求 子目录=类别

目录组织与标注格式以源站说明和下载后实际文件为准。

数据说明

The treatment of fractures of the distal tibia can be problematic due to the insubstantial soft-tissue covering this part of the anatomy. This study investigates a novel strategy for minimally invasive plate osteosynthesis of distal tibia fractures called bionic lightweight design plating. Following the structure of the animal trabecular bone, we utilized topological mathematical methods to redesign the material layout of the internal fixation device to fulfill the desired lightweight design within given boundary conditions. The results showed that this method can maintain the same stability of the construct as the original plate after a reduction in the original volume by 30%, and the differences in strain energy of plates and maximum node displacement of constructs between the constructs [RP construct vs. LP construct] were not statistically significant (p > 0.05). In the safety assessment of the constructs, the peak stress of plates between constructs was found to not be statistically significantly different under a doubled physiological load (p > 0.05). The average stress of the plates’ elements exceeding the allowable stress was analyzed, and no statistically significant differences were found between the two constructs under axial compression stress conditions (p > 0.05). The average stress of the plates’ elements in the redesigned plating construct under torsional stress conditions was 3.08% less than that of the locked plating construct (p < 0.05). Under the double physiological load condition, 89% of the elements of the plate in the redesigned plating construct and 85% of the elements of the plate in the locked plating construct were lower than the maximum safe stress of the plate, which was 410 MPa (secondary allowable stresses). That reminds us the topology optimization offer a possible way to improve the capacity of soft tissue protection while ensuring the safety of the RP construct by reducing the volume of the implants.

许可

CC BY 4.0

引用

学术使用请引用 DOI 10.3389/fbioe.2022.820921.s004（source: https://frontiersin.figshare.com/articles/dataset/Table4_Optimal_Design_and_Biomechanical_Analysis_of_a_Biomimetic_Lightweight_Design_Plate_for_Distal_Tibial_Fractures_A_Finite_Element_Analysis_XLSX/19206315）。